Millwork and Trim Boards

Apex Urethane Millwork

All Apex Urethane Millwork products are manufactured in the United States of America (Pennsylvania). All chemicals and paints used in the manufacturing process of all products made by Apex Urethane Millwork are engineered, designed, manufactured, and continually tested and monitored for compliance to environmental and health standards in the United States.

All Apex Urethane Millwork products are manufactured with high-density, water-blown, rigid closed-cell (prevents water penetration and absorption) polyurethane foam and are completely free of HCFCs (hydrochlorofluorocarbons) and CFCs (chlorofluorocarbons), which are both known to be ozone-depleting chemical compounds. The "ozone friendly" polyurethane products manufactured by Apex Urethane Millwork, using patented and proven technology, are inert cellular foams with low permeability (therefore emit no toxic gases into the air), and are made of a high-density polymer comparable to kiln-dried white pine millwork, with a manufactured skin density higher than white pine and lighter in weight.

AZEK® Trim

AZEK® Trim with the AZEK Edge has precise sealed edges on all 4 sides (S4S). Long known for the unequalled combination of Uniformity, Durability, Workability, and Beauty, AZEK Trim has the proven performance and confidence of a building code report.

AZEK Trim products, available in trim, sheets, cornerboards, and beadboard, offer many reasons to choose AZEK Trim for your next project. Using traditional tools and fasteners, AZEK Trim products can be worked just like wood – even mitered, routed, and turned on a lathe. For custom applications, AZEK Trim products can be laminated and even heat formed to create curves.

Certainteed Trim Boards

Make An Impression With Long-Lasting, Beautiful Looks... The Possibilities Are Endless...

You can use Restoration Millwork anywhere you would use vinyl or wood trim.  The design possibilities are endless using our sheets, trimboards, corners and our wide range of specialty profile products. 

Fypon Millwork

Ready to learn more about Fypon products for the inside and outside of your home? You've come to the right place! This section of our web site is dedicated to the particular needs of homeowners.Here you'll discover how urethane products are made, what products match up with the style of your home and where to locate a dealer near you. We appreciate you visiting this section of our web site and hope you find inspiration and information for all your home improvement projects!

LP Smart Trim

Choosing LP SmartSidelap siding and exterior trim are great ways for you to add real craftsmanship to your home. It is an affordable alternative that offers you the natural look of real wood without many of the problems commonly associated with wood. That's because LP SmartSide products are a highly engineered wood siding, designed to withstand tough environments.

Vinyl Trim & Dental Millwork

When you want fashionable curb appeal for your home that's guaranteed to last, Mid-America Siding Components® has the products for you. These exterior decor products are available in the most colors and a wide range of sizes to add character to any home.

Our products are designed to work together to create a unified look. They can be ordered in colors that complement or contrast with your home's siding color. Once these products have been installed, you will also enjoy the benefit of no maintenance.

Siding components from Mid-America are available through wholesale distributors and are installed by qualified contractors. Ask your contractor or builder to use Mid-America products on your home to make a distinctive statement.

Moulding and Millwork

Established in 1926, as a family owned and operated company, Moulding & Millwork has become one of the largest suppliers of wood mouldings in North America, including pine, oak, poplar, hemlock, mahogany, maple, cedar and MDF mouldings. With 9 modern manufacturing facilities and 37 sales and warehouse facilities, we are able to satisfy regional product needs and provide superior local market service.

Primed Cedar Trim

Potlatch Corporation is a real estate investment trust, or REIT, that owns and manages 1.5 million acres of timberlands located in Arkansas, Idaho and Minnesota and a 17,000-acre hybrid poplar plantation in Oregon. Through a taxable REIT subsidiary we also operate 15 manufacturing facilities that are engaged in the production of commodity wood products and bleached pulp products. The company traces its history to the founding in 1903 of Potlatch Lumber Co.

Potlatch Lumber and Panels "We make a wide range of wood products for industrial and consumer use at our facilities in Arkansas, Idaho, Minnesota, and Michigan.

In Arkansas, we make lumber from Southern yellow pine. Our Idaho mills produce lumber from several species, a full line of cedar products, a variety of fingerjoint edge-glued lumber products, and industrial-grade fir plywood and particleboard.

In the Great Lakes region, our Minnesota and Michigan mills produce precision-cut studs and finger-jointed studs in spruce, pine, and fir (SPFs).

Many of our lumber and panel products can be purchased with chain-of-custody certification under the strict standards of the Forest Stewardship Council (FSC). The FSC certification is a third-party standard audited by either the Rainforest Alliance's Smartwood® program or Scientific Certification Systems (SCS), both leading third-party certifiers."

Turncraft Fiberglass Columns

Turncraft, a division of Cascade Wood Products established in 1949, was built on a rich tradition of creating quality products from premium materials. Since manufacturing our first column in 1963, more architects and builders have chosen Turncraft columns because of our thoughtful design, exceptional materials, fine workmanship, superior assembly, and extensive selection. Precise historical research and authentic architectural specifications reflect our dedication to the quality you can expect from all of our products—from in-stock columns to custom-built solutions.

oursuppliers.png
millwork_apex.jpg
railings_azek.jpg
millwork_lp.jpg
millwork_ma.jpg
millwork_molding.jpg
millwork_potlatch.jpg
millwork_restorationmillwork.jpg
millwork_turncraft.jpg
millwork_typon.jpg
moreinfo_red.png
 

Products

Service Area

Elmira, NY
Cortland, NY
Watertown, NY
Oswego, NY
Amsterdam, NY
Plattsburgh, NY
Lockport, NY
Peepskill, NY
Kingston, NY
Saratoga,NY
Buffalo, NY
Ithaca, NY
Syracuse, NY
Rochester, NY
Brockport, NY
Ontario, NY
and much, much more.


Our Hours


Winter Hours In Effect
Monday - Friday: 7:30am to 5:00pm
Saturday: Closed
Sunday: Closed

lakesiderolloffservice.jpg
Click to learn more about our Rolloff Services